Thursday, October 28, 2010

Coke Can Votive Tutorial

Here’s a fun and free craft decoration for you to try when you have nothing better to do!  All you need are aluminum cans, an X-acto  knife, sharp scissors and your imagination.  I made these for votive containers for a fundraiser, but there are so many ways to use them…and, if you’re a nerd like me, they are fun to make!

Dec20090038

Start with a rinsed out can and use your X-acto knife to puncture a horizontal slit in the middle of the can about an inch long.  Then cut the can in half with your scissors into two equal parts.  Be careful with sharp edges.  And yes, I am in my car waiting for the afternoon carpool…a particularly productive part of my day!

Dec20090021

Using your scissors, start experimenting with cuts…this is a simple crown cut using diagonal cuts.

Dec20090023

It may not look like much now, but once you drop a tea light candle in here and group a few of these together, they are unique and unexpected.

Dec20090015

Here’s another look…cut 1 1/2” slits vertically down around the perimeter of the can…these are about 3/4” wide.  Using a pen, curl the cut edges away from the can by applying pressure to the aluminum…you can make these curls loose or tight.

Dec20090017

Be sure that you push down the tab opening so that the surface is flush and the candle will rest on a flat surface.

Dec20090019

Make sure to flatten the concave bottoms of the can by using a flat bottomed cup, glass or whatever you have on hand.

Dec20090027

It doesn’t have to look pretty, but the tea light candle needs to lay flat when burning.

Dec20090029

Let your imagination run wild by cutting strips thin, very thin, on an angle, etc. 

Dec20090038

These look so pretty when the candlelight reflects off of the many cuts.

Dec20090042

Here’s a side shot for more detail.  These are going to be perfect for the “recycled” or “green” look of our fundraiser.  You could paint the sides of the cans before cutting to cover up the graphics.  Have fun with this! 

2 comments:

  1. Did you drink that Bud Light while you were waiting in the carpool line so you could make the votive?:) Cute idea!

    ReplyDelete
  2. I certainly did not, Miss Maegan smarty pants...I don't drink beer!

    ReplyDelete